How to Sight in a Rifle Scope at 25 Yards. Discover 6 Easy Steps

To shoot with long-range precision, you need a rifle scope. Sighting your rifle scope may require some technical knowledge, but once you’re familiar with the steps, it becomes easy. However, before sighting your rifle scope, there’re some items to consider. These help in the proper alignment of the scope, so you hit your target easily. Let’s have a look at the items.

Items to Consider Before Setting up Your Rifle Scope

A Rifle: A rifle is a basic thing you’ll need. It contains the bullets and allows you to shoot at the target. The scope is set on the rifle.

A Rangefinder or Binoculars: A rangefinder enables you to get an accurate 50-yard shot. At the same time, the binoculars help you know where the bullets land and where to regulate.

The Rifle Rest: This consists of the front and rear rest. The rifle rest allows for optimum stability, thereby minimizing human errors.

Ammunition: Quality ammunition is important when shooting. Use the same ammunition you use in hunting to zero your rifle.

Aims: Ensure your aim is large enough, as this allows you to know where your bullet lands.

A Boresighter: It roughly adjusts the rifle scope during the initial shootings.

Proper Ear and Eye protection: The ear protection protects the ear from the loud rifle sound. At the same time, eye protection protects the eyes from external environmental factors.

After getting the above items, it’s time to set up your rifle scope. The below steps are six proven steps in sighting your rifle scope at 50 yards. Keep reading!

Six Steps to Sight in a Rifle Scope at 50 Yards

Step 1. Install Your Scope Correctly

Improvement in technology means many recent rifles come with a scope mount. Installing the rifle scope is the first step in ensuring accuracy. Some scope rings only match some particular scope bases. It’s important for the rings and scope mount to fit properly with the rifle’s design; thereby, ensuring a proper setup. After this, you can move on to the next step, which is about eye distance. 

Step 2. Modify the Eye Gap

Situating your scope to see a clear vision is the next step. Fine-tuning the eye relief to create a distance between your eyes and the scope is crucial. As a result, this prevents accidental hitting of your eye when you shoot the rifle. If there isn’t enough distance between the eyepiece and the scope, the recoil may trigger the scope backward upon shooting. Thereby causing the rifle scope to hit your eye, resulting in fatal injury.

Step 3. Stabilize Your Rifle

To correctly sight in your scope, there’s a need to level the rifle. The rifle rest comes into action here, as it has a front and rear rest, ensuring stability. In addition, you can make use of a mount, bipod or tripod to stabilize the rifle. Using any of these reduces human error to the barest minimum – thereby allowing you to aim properly.

Step 4. Focus the Reticle Properly

“Reticle Cant” happens when the crosshairs are imbalanced with the windage and elevation adjustments. Unfortunately, many shooters do not take this aspect seriously. It’s essential to properly align the reticle, especially when shooting at a range of over 200 yards. Improper alignment can cause your shot to miss the target either to the left or to the right.

Step 5. Adjust the Minute of Angle (MOA)

This step requires an outdoor range since the MOA adjustment knob has a 1/4 inch increase, starting from 100 yards. For every 100 yards, that means it’s ¼ inches of adjustment per every Minute of Angle (MOA) click. The majority of shooters use the 1/16, 1/8 and 1/4 inch adjustment. So, for 25 yards, it’s 1/16 inches of adjustment for every MOA click. 

Step 6. Shoot the Aim

After the necessary adjustments, now it’s time to aim. Using a 1-inch grid sheet is one sure way to measure your adjustments and remove doubts. Shoot at your target from 25 yards out repeatedly and take note of where each target lands. Subsequently, if it lands where you want it, then you have a proper riflescope setup.

Conclusion

As we have seen above, correctly sighting in your rifle scope requires meticulous steps. However, natural circumstances like the weather must be considered aside from adjusting the rifle scope and the distance. Good weather is essential to correctly sight in your scope; therefore, ensure the weather is okay before shooting.

If you’re a beginner, there’s no need to rush the process. With constant practice and patience, you’ll develop your shooting skills in no time. Adhere strictly to the above steps, and in no time, you’ll be shooting like a professional.

Leave a Comment