Suppose you’re going hunting with your buddies or to the range for some target practice. Missing your target is not at all fun. However, you can fix this when you have a zeroed-in rifle scope.
So, here’s how to sight in your scope at 50 yards with these five quick-and-easy steps.
Step #1. Get a Stable Shooting Ground
The primary step to all target practice is having a stable ground and grip on your rifle. This has nothing to do with how well you shoot, but it does help take steady aim and help you scope in.
You can use some sandbags or a rifle stabilizer to help you balance your rifle and keep it stable. This will minimize all human errors and help you aim better and faster.
Note: You should always have a stable grip on your rifle, whether an automatic or a bolt action model.
Step #2. Use a Boresighter
This step is relatively straightforward. However, you would need to understand how the bore sighter works. Using it is pretty simple, and all you need to do is set a target at 50 yards and set down your rifle.
Firstly, remove the bolt, align the target with your barrel and then shoot. Aim for a bullseye as that will help adjust your aim and sight in the scope better. A bullseye is best as it is easier to align the target within the view through your barrel.
Next, line up your barrel with the target, ensure that it is steady, and then look through your scope.
Now, check the target area for the shot and then look through the scope. Now, adjust the windage and elevation screws. Make sure that the two are aimed at the center of the target.
Finally, fire three shots and adjust accordingly to align the scope at 50 yards.
Note: You can also move a little closer to about 25 yards. Adjust your scope accordingly and sight it at 25 yards. Finally, move back to 50 yards for a precise aim on the target.
Step #3. Decide on the Ammo
Deciding which ammo to use can also help sight in the scope and fine-tune the aim. However, make sure to stay consistent with the ammo you use as it can impact the final results.
Make sure that you zeroed in your rifle at 50 yards and then shoot. This will help you compare various ammo loads and help you decide on the ideal choice. Once you’re sure that the ammo you’re using feels perfect, try shooting again and hit the bullseye for superior precision.
Note: You can also sight in at 100 or 200 yards if you’re confident enough with your shot, but we recommend sticking with 50 yards.
Step #4. Clean the Rifle Barrel
Also, make sure to clean your rifle barrel and let it cool down before shooting again. This will make the entire step much more manageable and seamless and help you sight it much better.
Note: If you’re lucky and precise with your shots. You might get your rifle pretty close to a perfect sight in three or four shots, but sometimes it takes quite a few more to do so.
Step #5. Double Check Everything
Finally, make sure to double-check everything and shoot extra shots. This will enable you to get a better understand of the wind flow and bullet travel. Hence, you will be able to make much better shots and improve your aim.
You can also use a regular coin to adjust your aim on the target and compare different shots. Keep shooting at the target and aim for the bullseye. This will help you tweak your shots and improve your aim.
Note: Most rifle scopes will have adjustable crosshairs in increments of about ¼ MOA (minute of angle). This equates to a ¼ inch of movement per click if you have sighted your scope at 100 yards.
Failing to follow the steps above can lead to challenging scenarios with adequately sighting in your scope. However, once you scope in your rifle at 50 yards, make sure to keep the scope secured at the position. Also, handling it with care will help you stay true to the set aim and make it easy to use for any situation.
Hence, the step-by-step guide above will ensure that you get your rifle scope sighted in smoothly. So, rest assured and follow the guide above for maximum effectiveness with sighting in your rifle scope.